View NE5550234-T1_5646337.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

r09ds0039ej0100 rev.1.00 page 1 of 14 apr 25, 2012 data sheet ne5550234 silicon power mos fet features ? high output power : p out = 33.0 dbm typ. (v ds = 7.5 v, i dset = 40 ma, f = 460 mhz, p in = 15 dbm) ? high power added efficiency : add = 68% typ. (v ds = 7.5 v, i dset = 40 ma, f = 460 mhz, p in = 15 dbm) ? high linear gain : g l = 23.5 db typ. (v ds = 7.5 v, i dset = 40 ma, f = 460 mhz, p in = 0 dbm) ? high esd tolerance ? suitable for vhf to uhf-band class-ab power amplifier. applications ? 150 mhz band radio system ? 460 mhz band radio system ? 900 mhz band radio system ordering information part number order number package marking supplying form ne5550234 ne5550234-az v5 ? 12 mm wide embossed taping ? gate pin faces the perforation side of the tape NE5550234-T1 NE5550234-T1-az 3-pin power minimold (34 pkg) (pb-free) ? 12 mm wide embossed taping ? gate pin faces the perforation side of the tape ? qty 1 kpcs/reel remark to order evaluation samples, please contact your nearby sales office. part number for sample order: ne5550234 absolute maximum ratings (t a = 25 ? c, unless otherwise specified) operation in excess of any one of these parameters may result in permanent damage. parameter symbol ratings unit drain to source voltage v ds 30 v gate to source voltage v gs 6.0 v drain current i ds 0.6 a drain current (50% duty pulsed) i ds-pulse 1.2 a total power dissipation note p tot 12.5 w channel temperature t ch 150 ?c storage temperature t stg ? 65 to +150 ?c note: value at t c = 25 ?c caution observe precautions when handling because these devi ces are sensitive to electrostatic discharge. r09ds0039ej0100 rev.1.00 apr 25, 2012
ne5550234 r09ds0039ej0100 rev.1.00 page 2 of 14 apr 25, 2012 recommended operating range (t a = 25 ? c) parameter symbol test conditions min. typ. max. unit drain to source voltage v ds ?? 7.5 9.0 v gate to source voltage v gs 1.65 2.20 2.85 v drain current i ds ? 0.38 ? a input power p in f = 460 mhz, v ds = 7.5 v ? 15 20 dbm electrical characteristics (t a = 25 ? c, unless otherwise specified) parameter symbol test conditions min. typ. max. unit dc characteristics gate to source leakage current i gss v gs = 6.0 v ? ? 100 na drain to source leakage current (zero gate voltage drain current) i dss v ds = 25 v ? ? 10 a gate threshold voltage v th v ds = 7.5 v, i ds = 1.0 ma 1.15 1.65 2.25 v drain to source breakdown voltage bv dss i ds = 10 ? a 25 38 ? v transconductance g m v ds = 7.5 v, i ds = 140 ? 100 ma ? 0.44 ? s thermal resistance r th channel to case ? 10.0 ? ?c/w rf characteristics output power p out f = 460 mhz, v ds = 7.5 v, 31.5 33.0 ? dbm drain current i ds p in = 15 dbm, ? 0.38 ? a power drain efficiency ? d i dset = 40 ma (rf off) ? 70 ? % power added efficiency ? add ? 68 ? % linear gain g l note 1 ? 23.5 ? db load vswr tolerance note 2 f = 460 mhz, v ds = 9.0 v, p in = 15 dbm, i dset = 40 ma (rf off) load vswr=20:1(all phase) no destroy output power p out ? 33.0 ? dbm drain current i ds ? 0.36 ? a power drain efficiency ? d ? 74 ? % power added efficiency ? add ? 73 ? % linear gain g l note 3 f = 157 mhz, v ds = 7.5 v, p in = 15 dbm, i dset = 40 ma (rf off) ? 25.8 ? db output power p out ? 32.2 ? dbm drain current i ds ? 0.35 ? a power drain efficiency ? d ? 62 ? % power added efficiency ? add ? 60 ? % linear gain g l note 4 f = 900 mhz, v ds = 7.5 v, p in = 17 dbm, i dset = 40 ma (rf off) ? 18.3 ? db notes: 1. p in = 0 dbm 2. these characteristics values are measurement usin g measurement tools especially by renesas. 3. p in = ? 5 dbm 4. p in = 7 dbm remark dc performance is 100% testing. rf performanc e is testing several samples per wafer. the wafer rejection criterion for standard de vices is 1 reject for several samples.
ne5550234 r09ds0039ej0100 rev.1.00 page 3 of 14 apr 25, 2012 test circuit schematic for 460 mhz c20 c10 in out c22 c11 c12 c21 c1 v ds c1 l1 r1 v gs ne5550234 50 ? 50 ? l20 l10 l11 components of test circuit for measuring electrical characteristics symbol value type maker c1 1 ? f grm31mr71h105ka88l murata c10 27 pf grm1882c1h270ja01 murata c11 3.9 pf grm1882c1h3r9cz01 murata c12 18 pf grm1882c1h180ja01 murata c20 12 pf grm1882c1h120ja01 murata c21 1.5 pf grm1882c1h1r5cz01 murata c22 100 pf grm2162c1h101ja01d murata r1 4.7 k ? 1/10 w chip resistor ssm ssm_rg1608pb472 l1 47.2 nh ? 0.4 mm, ? d = 2 mm, 7 turns ohesangyou l10, l11 12 nh ll1608-fs12nj toko l20 7.8 nh ? 0.4 mm, ? d = 1.4 mm, 3 turns ohesangyou pcb ? r1776, t = 0.8 mm, ? r = 4.8, size = 30 ? 40 mm panasonic sma connecter ? waka 01k0790-20 waka component layout of t est circuit for 460 mhz out v gs v ds c1 c1 in c1 c1 r1 r1 l1 l1 c10 c10 c11 c11 l10 l10 c12 c12 l11 l11 l20 l20 c20 c20 c21 c21 c22 c22
ne5550234 r09ds0039ej0100 rev.1.00 page 4 of 14 apr 25, 2012 typical characteristics 1 (t a = 25 ? c) rf: f = 460mhz, v ds = 3.6/4.5/6/7.5/9 v, i dset = 40 ma, p in = ?15 to 20 dbm im: f1 = 460mhz, f2 = 461 mhz, v ds = 3.6/4.5/6/7.5/9 v, i dset = 40ma, p out (2 tone) = 6 to 28 dbm 3rd/5th order intermodulation distortion im 3 /im 5 (dbc) 2 tones output power p out (2 tone) (dbm) im 3 /im 5 vs. 2 tones output power 2nd harmonics 2f 0 (dbc) 3rd harmonics 3f 0 (dbc) output power p out (dbm) 2f 0 , 3f 0 vs. output power power gain g p (db) power added efficiency add (%) input power p in (dbm) power gain, power added efficiency vs. input power 2f 0 - 3.6 v 2f 0 - 4.5 v 2f 0 - 7.5 v 2f 0 - 9 v 3f 0 - 3.6 v 3f 0 - 4.5 v 3f 0 - 9 v 3f 0 - 7.5v 3f 0 - 6 v 2f 0 - 6 v ?70 0 ?10 ?20 ?30 ?40 ?50 ?60 40 252015 0510 30 im 3 - 3.6 v im 3 - 4.5 v im 3 - 7.5 v im 3 - 9 v im 5 - 3.6 v im 5 - 4.5 v im 5 - 9 v im 5 - 7.5 v im 5 - 6 v im 3 - 6 v ?70 0 ?10 ?20 ?30 ?40 ?50 ?60 30252015 0510 output power p out (dbm) drain current i ds (a) input power p in (dbm) output power, drain current vs. input power p out - 3.6 v p out - 4.5 v p out - 7.5 v p out - 9 v p out - 6 v i ds - 7.5 v i ds - 4.5 v i ds - 6 v i ds - 9 v 0 40 35 30 25 20 15 10 5 2520 1050 ?20 ?10 ?5 15 0.0 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 ?15 add - 3.6 v add - 7.5 v add - 4.5 v add - 6 v add - 9 v g p - 3.6 v g p - 4.5 v g p - 7.5 v g p - 9 v g p - 6 v 0 0 40 80 35 70 30 60 25 50 20 40 15 30 10 20 51 0 2520 1050 ?20 ?10 ?5 15 ?15 35 i ds - 3.6 v remark the graphs indicate nominal characteristics.
ne5550234 r09ds0039ej0100 rev.1.00 page 5 of 14 apr 25, 2012 test circuit schematic for 157 mhz c20 c10 in out c22 c11 c21 c2 v ds c1 l1 r1 v gs ne5550234 50 ? 50 ? l11 l10 r10 components of test circuit for measuring electrical characteristics symbol value type maker c10 27 pf gqm1882c1h270jb01 murata c11 6.8 pf gqm1882c1h6r8db01 murata c20 8.2 pf gqm1882c1h8r2db01 murata c21 27 pf gqm1882c1h270jb01 murata c22 100 pf gqm1882c1h101jb01 murata c1 1 ? f grm21bb31h105ka2l murata c2 1 ? f grm21bb31h105ka2l murata l10 100 nh ll1608-fslr10j toko l11 47 nh d20-47n2 ohesangyou l1 74 nh d20-74n7 ohesangyou r11 5.6 ? mcr03j5r6 rohm r1 4.7 k ? mcr03j472 rohm pcb ? r1776, t = 0.8 mm, ? r = 4.8, size = 30 ? 40 mm panasonic sma connecter ? waka 01k0790-20 waka
ne5550234 r09ds0039ej0100 rev.1.00 page 6 of 14 apr 25, 2012 component layout of test circuit for 157 mhz c10 c11 c20 c21 c22 c1 r10 l1 c2 l10 rf in rf out v gs v ds l11 r1
ne5550234 r09ds0039ej0100 rev.1.00 page 7 of 14 apr 25, 2012 typical characteristics 2 (t a = 25 ? c) rf: f = 157 mhz, v ds = 3.6/4.5/6/7.5/9 v, i dset = 40 ma, p in = ?10 to 20 dbm add - 3.6 v add - 6 v add - 4.5 v add - 9 v add - 7.5 v p out - 3.6 v p out - 4.5 v p out - 6.0 v p out - 7.5 v p out - 9 v output power p out (dbm) drain current i ds (a) input power p in (dbm) output power, drain current vs. input power 0 0.0 40 0.8 35 0.7 30 0.6 25 0.5 20 0.4 15 0.3 10 0.2 5 0.1 25 1050 ?15 ?10 ?5 15 power gain g p (db) power added efficiency add (%) input power p in (dbm) power gain, power added efficiency vs. input power g p - 3.6 v g p - 4.5 v g p - 6 v g p - 7.5 v g p - 9 v 00 40 80 35 70 30 60 25 50 20 40 15 30 10 20 510 i ds - 3.6 v i ds - 6 v i ds - 4.5 v i ds - 9 v i ds - 7.5 v 20 25 1050 ?15 ?10 ?5 15 20 remark the graphs indicate nominal characteristics. ?
ne5550234 r09ds0039ej0100 rev.1.00 page 8 of 14 apr 25, 2012 test circuit schematic for 900 mhz c10 in out c22 c21 c20 c2 v ds c1 l1 r1 v gs ne5550234 50 ? 50 ? l11 l10 components of test circuit for measuring electrical characteristics symbol value type maker c10 10 pf gqm1882c1h100jb01 murata c20 6.8 pf gqm1882c1h6r8db01 murata c21 1 pf gqm1884c2a1r0cb01 murata c22 100 pf gqm1882c1h101jb01 murata c1 1 ? f grm21bb31h105ka2l murata c2 1 ? f grm21bb31h105ka2l murata l10 2.7 nh ll1608-fsl2n7s toko l1 74 nh d20-74n7 ohesangyou r1 4.7 k ? mcr03j472 rohm pcb ? r1776, t = 0.8 mm, ? r = 4.8, size = 30 ? 40 mm panasonic sma connecter ? waka 01k0790-20 waka
ne5550234 r09ds0039ej0100 rev.1.00 page 9 of 14 apr 25, 2012 component layout of test circuit for 900 mhz c10 c20 c21 c22 c1 r1 l1 c2 l10 rf in rf out v gs v ds
ne5550234 r09ds0039ej0100 rev.1.00 page 10 of 14 apr 25, 2012 typical characteristics 3 (t a = 25 ? c) rf: f = 900 mhz, v ds = 3.6/4.5/6/7.5/9 v, i dset = 40 ma, p in = ?10 to 20 dbm input power p in (dbm) power gain, drain current vs. input power 0 35 30 25 20 15 10 5 0 35 30 25 20 15 10 5 0 100 80 60 40 20 2520 1050 ?15 ?10 ?5 15 2520 1050 ?15 ?10 ?5 15 power gain g p (db) power added efficiency add (%) input power p in (dbm) output power, power added efficiency vs. input power output power p out (dbm) drain current i ds (a) 140 120 0 0.5 0.4 0.3 0.2 0.1 0 100 80 60 40 20 0 100 80 60 40 20 0.7 0.6 add - 6.0 v add - 4.5 v add - 7.5 v add - 9 v add - 3.6 v g p - 3.6 v g p - 4.5 v g p - 6 v g p - 7.5 v g p - 9 v i ds - 3.6 v i ds - 6.0 v i ds - 4.5 v i ds - 9 v i ds - 7.5 v p out - 3.6 v p out - 4.5 v p out - 6.0 v p out - 7.5 v p out - 9 v remark the graphs indicate nominal characteristics. ?
ne5550234 r09ds0039ej0100 rev.1.00 page 11 of 14 apr 25, 2012 s-parameters s-parameters and noise parameters are provided on our web site in a form (s2p) that enables direct import to microwave circuit simulators without keyboard inputs. click here to download s-parameters. [products] [rf devices] [device parameters] url http://www.renesas.com/products/microwave/download/parameter/
ne5550234 r09ds0039ej0100 rev.1.00 page 12 of 14 apr 25, 2012 mounting pad layout dimensions 3-pin power minimold (34 pkg) (unit: mm) 2.2 1.0 2.0 2.0 1.0 1.0 1.4 0.4 0.9 2.8 45 45 remark the mounting pad layout in this document is for reference only. when designing pcb, please consider workability of moun ting, solder joint reliability, prevention of solder bridge and so on, in order to optimize the design.
ne5550234 r09ds0039ej0100 rev.1.00 page 13 of 14 apr 25, 2012 package dimensions 3-pin power minimold (34 pkg) (unit: mm) (bottom view) (side view) pin connections 1. drain 2. source 3. gate 1.50.1 0.41 +0.03 ?0.06 4.50.1 0.420.06 0.420.06 1.60.2 3.0 1.5 2 13 2.50.1 4.00.25 0.8 min. 0.470.06
ne5550234 r09ds0039ej0100 rev.1.00 page 14 of 14 apr 25, 2012 recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recommended below, contact your nearby sales office. soldering method soldering conditions condition symbol infrared reflow peak temperature (package surface temperature) : 260 ? c or below time at peak temperature : 10 seconds or less time at temperature of 220 ? c or higher : 60 seconds or less preheating time at 120 to 180 ?c : 120 ? 30 seconds maximum number of reflow processes : 3 times maximum chlorine content of rosin flux (% mass) : 0.2% (wt.) or below ir260 wave soldering peak temperature (molten solder temperature) : 260 ? c or below time at peak temperature : 10 seconds or less preheating temperature (pack age surface temperature) : 120 ? c or below maximum number of flow processes : 1 time maximum chlorine content of rosin flux (% mass) : 0.2% (wt.) or below ws260 partial heating peak temperature (terminal temperature) : 350 ? c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin flux (% mass) : 0.2% (wt.) or below hs350 caution do not use different soldering methods together (except for partial heating).
all trademarks and registered trademarks are t he property of their respective owners. c - 1 revision history ne555 00234 data sheet description rev. date page summary 1.00 apr 25, 2012 ?? first edition issued
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is s ubject to change without any prior notice. before purchasing or using any renesas electronics products listed herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by renesas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any paten ts, copyrights or other intellectual property rights of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . 4. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this document, you should comply with the applicable export control l aws and regulations and follow the procedures required by such laws and regulations. you should not use renesas electronics products or the technology described in this document for any purpose rela ting to military applications or use by the military, including but not limited to the development of weapons of mass destruction. renesas electronics products and technology may not be used for or incorporate d into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information incl uded herein. 7. renesas electronics products are classified according to the following three quality grades: "standard", "high quality", an d "specific". the recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. you must check the quality grade of each renesas electronics produ ct before using it in a particular application. you may not use any renesas electronics product for any application categorized as "specific" without the prior written consent of renesas electronics. fu rther, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for an application categorized as "specific" or for which the product is not intended wh ere you have failed to obtain the prior written consent of renesas electronics. the quality grade of each renesas electronics product is "standard" unless otherwise expressly specified in a renesas electroni cs data sheets or data books, etc. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment ; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "specific": aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or syst ems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct thr eat to human life. 8. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas el ectronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have s pecific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance design . please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics produc t, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measu res. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compati bility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, in cluding without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of renes as electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this doc ument or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-o wned subsidiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. http://www.renesas.com refer to "http://www.renesas.com/" for the latest and detailed information. renesas electronics america inc. 2880 scott boulevard santa clara, ca 95050-2554, u.s.a. tel: +1-408-588-6000, fax: +1-408-588-6130 renesas electronics canada limited 1101 nicholson road, newmarket, ontario l3y 9c3, canada tel: +1-905-898-5441, fax: +1-905-898-3220 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-585-100, fax: +44-1628-585-900 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-65030, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. 7th floor, quantum plaza, no.27 zhichunlu haidian district, beijing 100083, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 204, 205, azia center, no.1233 lujiazui ring rd., pudong district, shanghai 200120, china tel: +86-21-5877-1818, fax: +86-21-6887-7858 / -7898 renesas electronics hong kong limited unit 1601-1613, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2886-9318, fax: +852 2886-9022/9044 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 1 harbourfront avenue, #06-10, keppel bay tower, singapore 098632 tel: +65-6213-0200, fax: +65-6278-8001 renesas electronics malaysia sdn.bhd. unit 906, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: +60-3-7955-9390, fax: +60-3-7955-9510 renesas electronics korea co., ltd. 11f., samik lavied' or bldg., 720-2 yeoksam-dong, kangnam-ku, seoul 135-080, korea tel: +82-2-558-3737, fax: +82-2-558-5141 sales offices ? 2012 renesas electronics corporation. all rights reserved. colophon 1.1

▲Up To Search▲

Price & Availability of NE5550234-T1

	To Download NE5550234-T1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .